New ETCR2000+ Clamp Ground Earth Resistance Tester Meter w/ RS232 0.01-1200Ω

Description

New ETCR2000+ Clamp Ground Earth Resistance Tester Meter w/ RS232  0.01-1200Ω
1
. Introduction
ETCR Clamp Earth Resistance Tester is widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc. When measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster. ETCR Clamp Earth Resistance Tester can measure the ground fault which can not be measured by traditional method, can apply in the occasion where traditional methods are unworkable; ETCR Clamp Earth Resistance Tester measures the integrated value of ground resistance and resistance lead.
2
.Technical Specifications
Function
Ground resistance test,
Loop
resistance test
Power Supply
6VDC 4 PCS of AA Alkaline batteries
Resistance
Range
0.01-1200Ω
Resistance Resolution
0.001Ω
Highest Resistance Accuracy
±1%±0.01Ω
Data memory
99 Sets
Alarm
Threshold
Setting
Range
Resistance: 1-199Ω
Alarm Sound and Light
“Beep-beep-beep” alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold.
Interference Signal Recognition
“Beep-beep-beep” tone, NOISE symbol blinking
Working Temperature and Humidity
-20
℃
-55
℃
；
20
％
RH-90
％
RH
LCD Screen
4 Digits LCD display, Screen L×W: 47mm×28.5mm
Clamp Size
65mm×32mm
Clamp Opening Extent
32mm
Tester Weight
1160g (With batteries)
Clamp Dimension
L×W×T: 285mm×85mm×56mm
Protection Level
Dual Insulation
Structural Feature
Clamp
CT
Shifting
Automatic shifting
External magnetic field
＜
40A/m
External electrical field
＜
1V/m
Single measurement time
0.5 second
Resistance measurement frequency
＞
1KHz
Measured current frequency
50/60Hz Automatic measurement
Low
Battery
Indication
Low battery symbol displays when battery is lower then 5.3V
Memory Full Indication
MEM symbol blinks when all 99 sets memory is full
Over Range Indication
Out of range indication “OLΩ”, “L0.01” or “OL A”
Auto Power-off
5 minutes after Boot up
Power Consumption
Max 50mA either in booting up or normally working, Continuously working for 30 hours
RS232 Interface (Optional)
The data stored in the meter are uploaded to the computer through RS232 interface and data wire, Then generate report files
Safety Provisions
IEC1010-1, IEC1010-2-032, Pollution level 2, CAT
Ⅲ
(600V)
Accessories
Meter: 1 piece, Test ring: 1 Piece, Meter Suitcase: 1 Piece
3. Field Application:
4. Comparison
PAYMENT
We accept
paypal
or
other payment terms
.
If there is any
import duties or taxes
,it is the
buyer's
responsibility.
We often declare it with low value.
Please make payment within
5 days
after you place your order.
Please
DO NOT
place your order if you are
NOT
intend to buy.
SHIPPING & DELIVERY
We will ship out the unit to you by
EMS
or
FedEx
or
DHL
. It will decided by seller according to your location
.(EMS Service Only for Russian Customers)
We will ship out the unit to the Express company first, it will take about
2-3
days, and then express company will deal with the package, so you can check the tracking number online after about
4
days. Please note this.
CONTACT US
Welcome!! Please read
ALL POLICIES
of us before your purchase.
If you have additional questions or concerns about this item, please contact us via email. We will response the most E-mail within
24 hours
.
RETURN POLICY
If the item is defective, please notify us within
7 days
after the receipt of the item.
The item shall be return in its original condition, in order to get it refunded or replaced.