Letter Wheel For Semi-automatic Sheet Embosser Metal Marking Label Stamp Printer

Description

Product Description
Font size
height 5mm, width 2.5mm
Embossing Tool
Embosser
Modified Item
No
Custom Bundle
No
Material
Aluminum Alloy
Print content
English letters, Arabic numerals, simple symbols
Print speed
2-4 characters / 10 seconds
Type
Embosser Machine
MPN
Does Not Apply
Model
YK-A01
Embossing Supply
Die steel
Die Type
Embossing/Debossing Dies
Coloring Supply Type
Paint
Foil Machine Type
Roll Press
Type wheel model
5mm
Size
2*28.5*27cm/12.59*11.22*10.63inch
Marking area
18*13.5cm/7*5.3inch
Character wheel material
chrome steel (12CrMo)
Brand
Unbranded
P
roduct description:
Purpose: To imprint changing parameters on metal nameplates with a thickness of <1 mm: such as product model, date, batch number, serial number, etc.
technical parameter:
Name: Semi-automatic nameplate coding machine
Type wheel model:
5mm
Size: 32*28.5*27cm/12.59*11.22*10.63inch
Marking area: 18*13.5cm/7*5.3inch
Print content: （40PCS） letters, numbers, simple symbols
【
English letters: A B C D E F G H I J K L M N 0 P Q R S T U V W X Y Z, Arabic numerals: 1 2 3 4 5 6 7 8 9 0 simple symbols ·×／一
】
Font size: height 5mm, width 2.5mm
Font distance can be adjusted equidistantly
Character wheel material: chrome steel (12CrMo)
Typing speed: 2-4 characters/10 seconds
Full circle positioning error of code plate:
±0．10 mm
Application: Used for marking all kinds of aluminum, copper, stainless steel, alloy, plastic and other nameplates on mechanical equipment, electromechanics, water pumps, valves, automobiles and motorcycles, and electrical appliances
working principle:
※ The alloy steel letter plate after high-frequency quenching heat treatment is under the action of external force (tapping the rubber handle by hand), and then generates a certain impact force to engrave characters or numbers with a certain depth (0.1~0.3mm deep) on the nameplate;
※ The heat-treated steel letter plate can be rotated to the required characters or numbers, and the typeface can be easily replaced;
※ The marking position and line spacing are steplessly adjusted by a special mechanical mechanism;
※ The word spacing can be adjusted by the small handwheel;
※ Different character heights can be realized by changing the dial;
※Nameplates of various shapes of appearance
<200×130mm
can be clamped and printed.
Instructions for use:
A. How to place the signs:
Place the nameplate on the upper left corner of the work surface, use a clamp and a magnet to lean against the nameplate to ensure that the nameplate will not loosen.
B. Loading and unloading of letter wheel:
First, unscrew the lock nut counterclockwise by hand (or use an inner hexagon wrench to remove the pressure plate bolt), select a suitable character wheel, and install the letter wheel on the front side (fasten the pressure plate and tighten the two bolts), tighten the nut, and align the pointer .
C. Printing and starting position adjustment:
Place the nameplate workbench, loosen the bolts behind the rubber head, remove the clutch handle and hook it, and at the same time rotate the row spacing handwheel and the table moving handwheel, so that the characters on the letter wheel are aligned with the position directly above the print frame (can be compared Scale) Use the adjustable locking handle to lightly lock the row spacing carriage, loosen the clutch handle, press the feed handle, and at the same time adjust the proper word spacing with the lower right hand wheel of the machine to adjust, tap the rubber head with your palm, and press it again The feed handle operates with the same action to achieve continuous printing.
Daily maintenance:
1.
The machine should be kept dry and clean to avoid rusting of internal parts, and proper amount of lubricant can be added to the relative sliding surface regularly.
2.
It should be avoided that the rotary character wheel is directly printed on the work surface, causing unevenness on the table surface and affecting the printing effect. The character wheel should be removed and stored if it is not used for a long time.
3.
When adjusting the printing start position, be sure to loosen the clutch handle. Forcibly twisting the turntable to move the handwheel quickly will damage the transmission belt and make the word pitch feed inaccurate or malfunction.
Products include:
1* Semi-Automatic Sheet Embosser
1*5mm word wheel
1*Fixed fixture
On May-10-21 at 01:25:28 PDT, seller added the following information: